HOME
|
Brillante Technical Specifications
|
|
ASTM C 484/99:
Resistance to Thermal Shock Test performed with immersion: 5 Number of test specimens with visible defects: 0 ASTM C 373/88 (99): Apparent Porosity, Water Absorption, Apparent Specific Gravity and Bulk Density Apparent porosity: 0.20% Water Absorption: 0.08% Apparent Specific Gravity g/cm3: 2.37 Bulk Density g/cm3: 2,36 ASTM C 499/78 (99): Standard Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile Length & Width, nominal size: 2x2cm Average size on 20 samples submitted: 19.98 mm Thickness, nominal 4 mm Average on 20 samples submitted: 3.91 mm ASTM C 502-93a: Standard Method for Wedging of Flat, Rectangular Ceramic Wall & Floor Tile Average on 20 samples submitted: 0.0% ASTM C 1028 - 96: Friction coefficient Three samples were considered. Both dry and wet conditions were used. Calibration was performed based on a 4-pulls test on standard tile, as prescribed in the norm. Samples were subjected to the pull test in the renovated conditions (cleaned samples). Four pulls perpendicular to the previous were performed on each sample. An actual normal load of 233 N was used for all the pulls. Friction coefficient in dry conditions: 0.71 Friction coefficient in wet conditions: 0.47 |